This article describes possibilities of editing structural, thermal and operational data of heating/cooling zones and structural partitions, upon which they are located.
Location in the program
Heating/cooling zone build-up editor is situated in: Tabella dati after having ticked: Zona della superficie di riscaldamento/raffrescamento and checked the drop-down list Struttura del pavimento riscaldante \ Struttura della parete di risc./raffr. \ Struttura del soffitto di risc./raffr..
Presentation of data in the heating/cooling zone build-up editor
The Struttura del pavimento riscaldante \ Struttura della parete di risc./raffr. \ Struttura del soffitto di risc./raffr. field presents overall thickness of the heating/cooling zone as well as overall thermal resistance.
Having opened the editor, the user gains access to particular data, on the basis of which overall values are calculated:
Thermal resistance of particular layers of a given heating/cooling zone along with structural partition thermal resistance. File:Floor-build-up-Party-Resistans.png4. Resistenza termica dello strato
Rivestimento predefinito originates from Dati generali for Tipo stanza elements. File:Floor-build-up-Covering-GDM.png7. Rivestimento predefinito
Rivestimento superiore may be changed for each Zona della superficie di riscaldamento/raffrescamento element. File:Floor-build-up-Covering-DEM.png8. Rivestimento superiore
Spessore totale del massetto/intonaco, in case of the Auto setting, may change according to the Carico di lavoro massimo value (), within limits allowed by the producer. The user may change thickness, also in the limits allowed by the system producer, while taking into consideration all other system data. Spessore del massetto/intonaco sopra il tuboSu is always calculated automatically by the program, and it cannot be changed manually.
In Tabella dati of the element Zona della superficie di riscaldamento/raffrescamento, the user ticked off Dati generali std. - otherwise, the field is available only in the Auto status, with no edition possibilities. File:Floor-build-up-Structural-Panel-DEM.png12. Pannello- selection in Tabella dati
Automatico The program selects Opzioni isolamento with minimal resistance according to EN 1264: 1:2011 2:2013 3,4:2009 5:2008 for a given structural panel and upon the Temperatura dall'altro lato value. File:Floor-build-up-Insulation-option-Auto.png14. Opzioni isolamento - Auto
Manuale It is possible to choose Opzioni isolamento from the catalogue or to define one's own by choosing particular insulation layers (up to 5 layers). File:Floor-build-up-Insulation-option-Manual.png15. Opzioni isolamento - Manuale
Disegno intersezione struttura
The user may change the way in which the structure cross section drawing is presented.
The program does not select elements among Definizione delle strutture from the I calcoli termici dell'edificio scope, and they should be corrected manually.
